Products

Petri dish is a kind of laboratory glassware for microbiological or cell culture, which is composed of a flat disc-shaped bottom and lid, suitable for laboratory inoculation, scarification, bacterial separation, and can also be used for routine culture of animal and plant cells, etc.

Serum pipettes are mainly used to accurately measure or transfer a certain volume of fluid, widely applied in cell culture, bacteriology, clinical, research experiments and other fields. The products are made of highly transparent polystyrene and are packaged in paper-plastic bags, with different colors being used to distinguish pipettes of different sizes.

B&M's® 384-well nucleic acid isolation plates are based on the classic silica gel membrane technology. Under conditions of high salt content and low pH, nucleic acids are adsorbed on the silica gel membrane, and impurities such as polysaccharides and proteins are not adsorbed. Further rinsing removes the remnants of impurities. Finally, pure nucleic acids are produced by elution with a slightly saline solution or pure water.

24/96/384 well nucleic acid extraction plate is an auxiliary material for high-performance nucleic acid extraction and separation, which is mainly used for primer desalination, enrichment, extraction and nucleic acid separation. It can conveniently and quickly process 24, 96, 384 biological samples as 24/96/384 biological samples for the purpose of separation, extraction, beneficiation, desalination, purification, recovery, and so on. 

B&M's® 96-well nucleic acid isolation plates are based on the classic silica gel membrane technology. Under conditions of high salt content and low pH, nucleic acids are adsorbed on the silica gel membrane, and impurities such as polysaccharides and proteins are not adsorbed. Further rinsing removes the remnants of impurities. Finally, pure nucleic acids are produced by elution with a slightly saline solution or pure water.

24/96/384 well nucleic acid extraction plate is an auxiliary material for high-performance nucleic acid extraction and separation, which is mainly used for primer desalination, enrichment, extraction and nucleic acid separation. It can conveniently and quickly process 24, 96, 384 biological samples as 24/96/384 biological samples for the purpose of separation, extraction, beneficiation, desalination, purification, recovery, and so on. 

B&M's® 24-well nucleic acid isolation plates are based on the classic silica gel membrane technology. Under conditions of high salt content and low pH, nucleic acids are adsorbed on the silica gel membrane, and impurities such as polysaccharides and proteins are not adsorbed. Further rinsing removes the remnants of impurities. Finally, pure nucleic acids are produced by elution with a slightly saline solution or pure water.

24/96/384 well nucleic acid extraction plate is an auxiliary material for high-performance nucleic acid extraction and separation, which is mainly used for primer desalination, enrichment, extraction and nucleic acid separation. It can conveniently and quickly process 24, 96, 384 biological samples as 24/96/384 biological samples for the purpose of separation, extraction, beneficiation, desalination, purification, recovery, and so on. 

B&M's® 24-well nucleic acid isolation plates are based on the classic silica gel membrane technology. Under conditions of high salt content and low pH, nucleic acids are adsorbed on the silica gel membrane, and impurities such as polysaccharides and proteins are not adsorbed. Further rinsing removes the remnants of impurities. Finally, pure nucleic acids are produced by elution with a slightly saline solution or pure water.

24/96/384 well nucleic acid extraction plate is an auxiliary material for high-performance nucleic acid extraction and separation, which is mainly used for primer desalination, enrichment, extraction and nucleic acid separation. It can conveniently and quickly process 24, 96, 384 biological samples as 24/96/384 biological samples for the purpose of separation, extraction, beneficiation, desalination, purification, recovery, and so on. 

B&M® 24-well centrifugal filter plates are assembled from 24-well filter plates + PTFE membrane + UHMWPE 20um sieve plate + compression ring. PTFE (fine powder resin) swells into a three-dimensional mesh structure known as PTFE, which creates billions of microscopic pores. This structure takes advantage of PTFE's inherent hydrophobicity (waterproofing) and non-stick properties, which allows the removal of particles that have fallen on the surface of the membrane. PTFE membranes and laminates provide equipment manufacturers with permanent, temperature- and chemical-compatible protection against microorganisms and particulates. The optimal combination of airflow and inlet pressure can improve the efficiency of most equipment designs.

B&M's® ultra-microcentrifugal filtration columns consist of an outer tube, an inner tube, a PTFE membrane and a pressure ring. PTFE (fine powder resin) swells to form a three-dimensional mesh structure known as PTFE, which creates billions of microscopic pores. The structure takes advantage of PTFE's inherent hydrophobicity (waterproofing) and non-stick properties, which allows the removal of particles that have fallen on the surface of the membrane. PTFE membranes and laminates provide equipment manufacturers with permanent, temperature- and chemical-compatible protection against microorganisms and particulates. The optimal combination of airflow and inlet pressure can improve the efficiency of most equipment designs.

B&M's® ultra-microcentrifugal filtration columns consist of an outer tube, an inner tube, a PTFE membrane and a pressure ring. PTFE (fine powder resin) swells to form a three-dimensional mesh structure known as PTFE, which creates billions of microscopic pores. The structure takes advantage of PTFE's inherent hydrophobicity (waterproofing) and non-stick properties, which allows the removal of particles that have fallen on the surface of the membrane. PTFE membranes and laminates provide equipment manufacturers with permanent, temperature- and chemical-compatible protection against microorganisms and particulates. The optimal combination of airflow and inlet pressure can improve the efficiency of most equipment designs.

Product Category: Multi-Tube Vortexer
Functions: sample mixing in solid-phase compound extraction, filtration, adsorption, separation, isolation, purification and concentration of target samples, isolation, separation and purification of nucleic acids.
Number of channels: 15-50 speakers
Stirring Mode: Rotary Stirring
Specification: Suitable for 2ml, 15ml, 50ml nucleic acid extraction columns or other reagent vials
Add Logo: Yes
Shipping Method: OEM/ODM

Product Category: Solid Phase Extractor, Vacuum Unit
Function: Solid phase compound extraction, filtration, adsorption, separation, extraction, purification, concentration of target samples.
Application: Compatible with multi-well plates for simultaneous filtration and extraction, can be used for nucleic acid purification, solid-phase extraction, protein precipitation.
Number of channels: 12-24-48-96 wells, 96&384 well plates
Extraction Method: Negative Pressure
Specification: For 2ml, 15ml, 50ml, 300ml Nucleic Acid Extraction Column, 24-well Plate, 96-well Plate, 384-well Plate or other specifications
LOGO Printing: Yes
Delivery Method: OEM/ODM

Product Category: Handheld Column Plate Filling Tool
Parameters: metal or plastic material, φ1-240mm (the diameter and length of the pad can be customized)
Purpose: filling of sieve plates, filters, membranes into columns and plates, filling of plastic seals and pressure rings.
Usage: SPE Small Column, Nucleic Acid Extraction Column, 96 Well Filter Plate, 384 Well Filter Plate.
Specification: Pusher φ1.0mm, φ1.2mm, φ2.0mm, φ2.25mm, φ3.0mm, φ4.0mm, φ5.1mm, φ6.0mm, φ7.4mm, φ8.3mm, φ9.0mm, φ11.0mm, φ13.0mm, φ15.8mm, φ110mm, φ240mm, length can be customized.
Packing: 1pc/bag, 10pcs/carton
Packaging material: aluminum foil pouch and self-sealing pouch (optional)
Carton: Neutral Label Box or BM Life Science Carton (Optional)
Add logo: can be printed
Shipping Method: OEM/ODM